10 ton Waste Grab Overhead Crane Traveling Bridge Crane
Waste Grab Overhead Crane Brief Introduction
QZ overhead crane with the grab is characterized by more reasonable structure and higher strength steel as a whole. The products has the follow parts: crane traveling mechanism, electrical, trolley, bridge, grab.
- The working class is A6. The span is 7.5m-31.5m.
- Working temperature is -25°C~40°C.
- The direction of platform door to the cabin is: side, end and top.
- The open direction of the grab is: paralleling with the beam and plumbing with the beam.
Waste Grab Overhead Crane Parameter
Lifting capacity | 5ton, 10ton, 16/3.2ton, 20/5ton, 32/5ton, 50/10ton | |
Span | 7.5~31.5m | |
Working system | A6 | |
speed | Lifting | 40 m/min |
Lifting/close | 38/13.6;8.16 | |
Trolley traveling | 40 m/min | |
Crane traveling | 90 m/min | |
Recommended rail | P38, P48 | |
Power supply | 380V, 50Hz, AC, 3-Phase |
Waste Grab Overhead Crane Safety features
- Limit switch: prevent pressure.
- Overload protect device: once overweight, stop working immediately.
- Buffer: avoid collision.
- Brake: a restraint used to slow or stop a vehicle.
- Emergency stop switch: has the protection of any emergency.
Waste Grab Overhead Crane Advantages
- Good quality with competitive price
- Reasonable structure, favorable performance
- Control the load easily and position the load exactly
- Smooth starting and stopping
- Superior safety and reliability
- Low noise, commodious cabin and good view
- Low dead weight low your cost
- Easy maintenance for parts
Waste Grab Overhead Crane Application
The product is widely used to loading garbage in garbage dump or power plant. All devices operating indoors, required rainproof equipment when the outdoor use. The lifting capacity includes the weight of the grab.
Waste Grab Overhead Crane Inquiry should include
Please inform us the following data for the purpose of servicing you better!
- Lifting capacity. not including the grab deadweight, about the grab, what’s the volumn you need?
- Span (rail center to rail center)
- Lifting height (Lowest point to ground)
- Power supply ( 380V, 50Hz, AC, 3-Phase, is that ok? )
- Working condition: what’s the material to lift?