Before driving, check: whether the mechanical, electrical, and safety devices are in good condition; whether the car can be touched, stuck, or hanged; confirm that everything is normal, and then send the power to test the car after the bell alarms. When the inspection found that there is the second paragraph of Chapter 1, stop immediately.
Concentration must be done during operation.
Always achieve steady rise, steady movement, and steady fall during operation. When approaching a neighboring car or a person, you must ring the bell in time to warn you.
Insist on not passing people or vehicles when grabbing and transporting items;
During operation, anyone who issues a stop signal should stop immediately.
During the hoisting process, it is not allowed to operate two mechanisms at the same time (that is, the large cart, the trolley, and the grasping lift cannot operate at the same time).
Under normal circumstances, large vehicles or small vehicles are not allowed to suddenly accelerate, stop or run in reverse, and are not allowed to run in the highest gear.
When getting on and off the vehicle, you must pass through the ladder platform. It is not allowed to climb from one car to another. It is not allowed to walk along the track.
No live animals are allowed to be stacked on the vehicle, and tools should be fixed.
When there are more than two cranes on the same span track, they are not allowed to collide with each other.
When the grab is running without load, it should be raised to a height of more than 2 meters.
When dealing with faults or leaving the car, the controller must be placed in the “0” position and the power supply must be cut off. Don’t leave the car with hanging heavy objects. When off work, park the trolley at one end of the cab and place the grab flat on the coal pile.
Lifting steel wire ropes and cables should be correctly wound on the reel.
When the grab is working, in order to prevent the items from falling out, the grab should be closed tightly and it is not allowed to shake.
Before moving the cart, the trolley and grab must be moved to the middle of the traveling beam to keep the traveling cart moving stably. The grab is not allowed to move the cart after grabbing heavy objects.
